Juniper PTX10008 Hardware Manual page 179

Table 66: Physical Specifications of a JNP10K-PWR-DC Power Supply (continued)
Specification
Depth
Weight
JNP10K-PWR-DC2 Power Specifications
HVDC power supplies (JNP10K-PWR-DC2) are supported in only the PTX10008 and PTX10016 redundant
configuration. Table 67 on page 181
PTX10000 chassis.
Table 67: Power Specifications for the JNP10K-PWR-DC2 Power Supply
Item
DC input voltage
DC input current
rating
Output power
Table 68 on page 182 shows the physical specifications for a JNP10K-PWR-DC2 power supply.
Value
14.4 in. (36.58 cm)
6 lb (2.72 kg)
lists the power specifications for the HVDC power supply used in a
Specifications
Minimum operating voltage: –40 VDC
Nominal operating voltage: –48 VDC
Operating voltage range: –40 VDC through –72 VDC
76-A maximum at minimum operating voltage (-40 VDC) with 80-A dip switch setting and
5500 W output load.
64-A maximum at nominal operating voltage (–48 VDC) with 80-A dip switch setting and
5500 W output load.
60-A maximum at minimum operating voltage (-40 VDC) with 60-A dip switch setting and
4400 W output load.
50-A maximum at nominal operating voltage (-48 VDC) with 60-A dip switch setting and
4400 W output load.
2200 W for low input (60-A) single feed
4400 W for low input (60-A) dual feed
2750 W for high input (80-A) single feed
5500 W for high input (80-A) dual feed
181