Line Cards - Juniper PTX10008 Hardware Manual

Table 5: CLI Equivalents of Terms Used in Documentation for PTX10000 Routers
Hardware
Item (CLI) Description (CLI)
Chassis PTX10008
PTX10016
Routing and CB (n)
Control
Board
FPC (n) Abbreviated name of
the Flexible PIC
Concentrator (FPC)
On PTX10008, and
PTX10016, an FPC
is equivalent to a
line card.
Xcvr (n) Abbreviated name of
the transceiver
PSU (n) Abbreviation for
power supply unit
One of the
following:
JNP10K-PWR-AC
JNP10K-PWR-AC2
JNP10K-PWR-DC
JNP10K-PWR-DC2
Value (CLI)
–
n is a value in the range
of 0–1.
Multiple line items
appear in the CLI if more
than one RCB is installed
in the chassis.
n is a value in the range
of 0–7 for the
PTX10008 and 0–15 for
the PTX10016. The
value corresponds to the
line card slot number in
which the line card is
installed.
n is a value equivalent to
the number of the port
in which the transceiver
is installed.
n is a value in the range
of 0–5. The value
corresponds to the
power supply slot
number.
Item In
Documentation Additional Information
Router chassis "PTX10008 Chassis Physical
Specifications" on page 159
"PTX10016 Chassis Physical
Specifications" on page 161
Routing and "PTX10000 Routing and Control
Control Board Board Description" on page 78
Line card (The Understanding Interface Naming
router does Conventions
not have actual
FPCs—the line
cards are the
FPC
equivalents on
the router.)
Optical "PTX10000 Optical Transceiver
transceivers and Cable Support" on page 184
AC, DC, One of the following:
HVAC, or
JNP10K-PWR-AC Power
HVDC power
Supply on page 61
supply
JNP10K-PWR-AC2 Power
Supply on page 64
JNP10K-PWR-DC Power
Supply on page 65
JNP10K-PWR-DC2 Power
Supply on page 68
38
and