Table 63: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input (continued)
Locale
Cord Set Rating
JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input
The JNP10K-PWR-AC2 HVAC or HVDC power supplies requires a high current cable assembly when set
for 30-A input. One end of the cable has an Anderson APP-400 connector, the other end of the cable is
bare wire. See
Figure 74 on page 178
are not shipped automatically with JNP10K-PWR-AC2 orders. An example of the right-angle cable and
connector is shown in
Figure 76 on page
For connection to AC systems, Juniper provides a cable with either a NEMA 30-A connector
(Figure 74 on page
178) or an IEC 330P6W connector
Figure 74: NEMA 30-A Connector
Figure 75: IEC 330P6W Connector
Plug Standards
and
Table 64 on page
179. These cables are separately orderable and
180.
(Figure 75 on page
Spare Juniper
Model Number
Graphic
178).
178