Software - Juniper PTX10008 Hardware Manual

Figure 13: JNP10K-PWR-DC2 Power Supply
Table 3 on page 34 provides an overview of the differences among the power supplies.
Table 3: Power Supply Overview
Power Supply Model
JNP10K-PWR AC
JNP10K-PWR-AC2
JNP10K-PWR DC
JNP10K-PWR-DC2

Software

The Juniper Networks PTX10000 line of Packet Transport Routers run Junos OS, which provides Layer 3
routing services. The same Junos OS code base that runs on the PTX10000 line of routers also runs on all
Juniper Networks EX Series Ethernet Switches, M Series Multiservice Edge Routers, MX Series 5G universal
Routing Platforms, and SRX Series Services Gateways.
SEE ALSO
PTX10008 Cooling System and Airflow | 46
PTX10008 Chassis Physical Specifications | 159
PTX10K-LC1101 Line Card | 91
Input Type Wattage
AC only 2700 W
AC, HVAC, or HVDC 5000 W, single feed; 5500 W,
dual feed
DC only 2500 W
DC only 2750 W, single feed; 5500 W,
dual feed
Power Bus
Standard
Standard or enhanced
Standard
Standard or enhanced
34