Step 1: Begin; Meet The Ex2300 Line Of Ethernet Switches - Juniper EX2300 Quick Start Manual

Step 1: Begin

IN THIS SECTION

Meet the EX2300 Line of Ethernet Switches | 1

Install the EX2300 in a Rack | 3
Rack It! | 4
Power On | 5
In this guide, we provide a simple, three-step path, to quickly get you up and running with your new
EX2300. We've simplified and shortened the installation and configuration steps, and included how-to
videos. You'll learn how to install an AC-powered EX2300 in a rack, power it up, and configure basic
settings.
NOTE: Are you interested in getting hands-on experience with the topics and operations covered
in this guide? Visit Juniper Networks Virtual Labs
the Junos Day One Experience sandbox in the stand alone category. EX switches are not
virtualized. In the demonstration, focus on the virtual QFX device. Both the EX and QFX
switches are configured with the same Junos commands.
Meet the EX2300 Line of Ethernet Switches
®
The Juniper Networks
for supporting today's converged network access deployments.
You can interconnect up to four EX2300 switches to form a Virtual Chassis, enabling these switches to
be managed as a single device.
The EX2300 switches are available in 12-port, 24-port and 48-port models with AC power supplies.
NOTE: The EX2300-24T-DC switch is DC-powered.
EX2300 line of Ethernet switches provide a flexible, high-performance solution
and reserve your free sandbox today! You'll find
1