Cleaning And Disinfection - AGFA Dry 2.4M User Manual

122 | Dry 2.4M | Preventive maintenance schedule

Cleaning and disinfection

All appropriate policies and procedures should be followed to avoid
contamination of the staff, patients and device. All existing universal
precautions should be taken to avoid that the digitizer comes into contact with
potential contaminations. Details about cleaning can be found in the following
pages.
To clean the exterior of the printer:
1. Switch off the printer.
2. Remove the power plug from the socket.
3. Wipe the exterior of the printer with a clean, soft, damp cloth.
Use a mild soap or detergent if required but never use an ammonia–based
cleaner.
4. Plug in the printer and switch it on.
Related Links
Switching off the printer
Switching on the printer
2652B EN 20210601 1655
WARNING:
Make sure no liquid gets in the printer.
Note: Do not open the printer for cleaning. No components
inside the printer require cleaning by the user.
on page 71
on page 68