12 | DRY 3.4 | Advanced Operation (key-operator mode)
Stopping the printing process
To stop the printing process on an adequate way, it is recommended to use the
Stop printing menu.
1. Press the Key-operator key to enter the Key-operator mode.
2. On the Key-operator main menu, press the Confirm key to select 'Stop
printing'.
While the current print job is finished, the Stop Printing screen is
displayed:
After the current print job is completed, the following screen is displayed:
3. Press the Confirm key to resume printing or press the Escape key to return
to the Key-operator main menu.
2604A EN 20180322 1454
Note: The modality name defined during installation will be
used to refer to the corresponding modality. In case there is
also a nickname (daily used name) defined during
installation, the nickname is used.