Configuring The Sampling System - Agilent Technologies 8453 Operator's Manual

2 Kinetics Mode

Configuring the Sampling System

The sampling system can be selected and setup either in the instrument menu
or in the Instrument panel of the SideBar of the graphical user interface.
Select Sampling System... displays the Sampling System dialog box, which
allows you to select either Manual operation or the multicell transport system
(8-cell) or (7-cell). If you want to use the Peltier temperature controller
(Agilent 89090A #100), the Manual sampling system has to be selected.
When you switch from Manual sampling to the multicell transport system, the current
C A U T I O N
single-cell results are discarded.
Setup Sampling System... displays the Setup dialog box that allows you to set
the run-time parameters for the selected sampling system.
The Cells dialog box allows you to set up the run-time parameters for the
multicell transport.
16 Biochemical Analysis Software for Agilent ChemStation