Pre-Run Command Or Macro (Run Time Checklist); Data Acquisition (Run Time Checklist) - Agilent Technologies 8453 Operator's Manual

Figure 3

Pre-run Command or Macro (Run Time Checklist)

If a pre-run command or macro is specified, it is executed before the analysis
is started. This part is typically used for system customizing in conjunction
with other software packages.

Data Acquisition (Run Time Checklist)

• All parameters are set to the initial conditions specified in the current
• If specified the injection program is executed and an injection is made from
• The monitor display shows the progress of the analysis including
• Data are acquired and stored in a data file.
Understanding Your Agilent ChemStation
Method Operation
method.
the currently defined vial.
chromatographic/electropherographic information, and spectral data if
available.
What Happens When a Method is Run?
2
Methods
53