Agilent Technologies 8453 Operator's Manual page 218

Figure 26
4 Place the plastic front cover on top of the sheet metal cover so that you are
Figure 27
5 Push the plastic cover down so that it locates on both sides.
6 Reconnect line power and turn on the instrument. Check that the
Maintenance and Repair
Removing and Replacing Covers
Replacing the Sample Pan and Cuvette Holder
able to connect the cable to the keyboard (SSI board).
Connecting the Keyboard Cable
spectrophotometer passes its self-test, this means that the green light on the
front panel comes on and that you can do a blank measurement from your
software and the keyboard of the spectrophotometer.
112