Agilent Technologies 8453 Operator's Manual page 563

• The data file naming scheme must be identical for the two sequence
After leaving this dialog with Ok (for selecting one of the existing sequence
data containers) or New (for creating a new sequence container), the user
can select the sequence lines to be executed during partial sequence.
Data Acquisition of Single Runs
The new data concept is also introduced for single runs. In this case the
data file is saved directly into the respective subdirectory. Since only one
method is employed for a single run, this method does not need to be
copied into the subdirectory; all actions are performed directly with the
master method. After the acquisition part of the method is completed a
copy of the master method is saved into the data file directory (ACQ.M).
Another copy (DA.M) is saved after the data analysis part of the master
method has been executed.
ChemStation Workflow
files.
2
Data Acquisition
Data Acquisition
17