Agilent Technologies 8453 Operator's Manual page 37

PC
Agilent 8453 UV-visible Spectroscopy System Operator's Manual
Installation Summary for Your Agilent 8453 General Purpose UV-visible System
Make sure that all of your PC components are connected to line power.
Make sure that your general purpose software for UV-visible spectroscopy is
installed.
A printer must be configured on your PC.
• Adjust paper size (for example, Letter, A4)
• Set Orientation to Portrait
The TCP/IP protocol must be installed and configured on your PC.
Your spectrophotometer must be configured with its IP address.
If you connected your spectrophotometer directly to your PC be sure that
the Agilent Bootp Service is installed and configured. If you connect to your
spectrophotometer using a LAN make sure that your network administrator
assigns the IP address to your spectrophotometer.
Installation and Start Up 2
37