Data File Naming In A Sequence; Automatic Data File Naming During A Sequence - Agilent Technologies 8453 Operator's Manual

8
Automation

Data File Naming in a Sequence

Data File Naming in a Sequence

Data file naming in a sequence can be done in the following ways:
• automatic,
• manual, or
• prefix/counter.

Automatic Data File Naming During a Sequence

Sample Vials
For example 017-0103.D
where:
• The first three digits are the vial number, for example, 017.
• The fourth digit in liquid chromatography and capillary electrophoresis is a
• The fifth and sixth digits are the sequence line that defines the method
• The seventh and eighth digits are the injection number for this vial by the
Blank Runs
For example NV--0499.D
where:
• NV stands for no vial.
• - is a separation hyphen.
• 0499 is the 99
176
separation hyphen (-); in a gas chromatograph, this will be either (F) for
front or (B) for back.
used, for example, 01 for the first sequence line.
method, for example, 03 for the third injection.
th
blank run of sequence line 4.
Understanding Your Agilent ChemStation