Saving and Retrieving Data
This section explains how you can save and retrieve measured data. This data
can be used for archiving, for method development at a later stage, or for
exchange with other Agilent ChemStations.
Your Agilent ChemStation has the ability to store and retrieve your data using
a binary, checksum protected data format (extension *.sd,*.std). All current
spectra -samples or standards- can be saved to disk for permanent storage.
Save and load of data is possible using local and network drives. In addition a
single spectrum can be selected for storage.
Saving your Samples
1 Choose Save, Samples As... from the File menu or click the toolbar icon.
Agilent 8453 UV-visible Spectroscopy System Operator's Manual
Using your Agilent 8453 UV-visible Spectroscopy System
Saving and Retrieving Data
4
67