Agilent Technologies 8453 Operator's Manual page 217

Figure 24
6 Slide the sheet metal front cover towards the rear of the instrument and lift it
1 Slide in metal front cover so that it locates on the bottom first. Slide it in
Figure 25
2 Tighten the screw near the top of the cover using a Pozidriv screwdriver.
3 Replace the sample pan and cuvette holder in the sample compartment.
Maintenance and Repair
Removing and Replacing Covers
Removing the Sheet Metal Front Cover
up.
Replacing the Front Covers
further so that it locates on top.
Replacing the Metal Front Cover
111