Agilent Technologies 8453 Operator's Manual page 220

Figure 30
5 Slide the sheet metal rear cover towards the front of the instrument and lift it
1 Slide in metal rear cover so that it locates on the bottom first. Slide it in further
Figure 31
2 Tighten the screw near the top of the cover using a Pozidriv screwdriver.
3 Replace the sample pan and cuvette holder in the sample compartment.
Maintenance and Repair
Removing and Replacing Covers
Removing the Sheet Metal Rear Cover
up.
Replacing the Rear Cover
so that it locates on top.
Replacing the Metal Rear Cover
114