Update The Gc Firmware And Driver; Configuring The Gc And Data System - Agilent Technologies 8860 User Manual

3 Installation for 8860 GC and 8890 GC

Update the GC Firmware and driver

4 Connect the power connector to the gasifier, and then plug the power cord into an appropriate
power source.
5 Plug in the GC power cord and turn on the GC.
Update the GC Firmware and driver
The Agilent gasifier requires the minimum firmware and driver revisions listed on
Download the latest firmware and driver revisions from the Agilent web site at
www.agilent.com/chem, or contact your local Agilent sales representative.
Failure to update the firmware and driver will result in failing to recognize and control the
NOTE
gasifier.

Configuring the GC and Data System

Agilent OpenLab CDS, Agilent OpenLab ChemStation, Agilent GC/MS MassHunter Acquisition, and
Agilent OpenLab CDS EZChrom Elite data systems contain information about the sampling
equipment in use. When gasifier hardware installation is complete, update the GC configuration.
See your data system documentation for details.
28 Agilent 8860, 8890, and 990 Micro GC Gasifier User Manual
page 21.