Table of Contents
Advertisement
Configuring Your System
The setup program configures the system automatically for your UV- Visible
spectrophotometer as Instrument 1, with an GPIB address of 25.
If you wish to use LAN communication, a different GPIB address, set up
an additional spectrophotometer, or set up an temperature control
accessory you must configure the system.
To configure your system:
1 In the Agilent ChemStation group start the Agilent UV- Visible
2 Choose Instruments from the Configure menu.
Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
Configuration Editor.
•
The Instrument Type box lists the instrument types available on your
Agilent ChemStation. Select one to begin your configuration.
•
Enter the name you want to call the instrument in the Instrument
Name box. The Agilent ChemStation will use this name to identify
the instrument.
•
Select Normal under Initial Screen Window Size to have your
instrument session window appear as a full screen but with an open
area across the bottom for icons. If you select Icon or Full Screen,
the instrument session window will start as an icon or as a full
screen.
•
Click OK to enter your selections and to display the Instrument
Name - Device Configuration.
•
To modify settings in an existing instrument configuration, you must
select the module first in the Selected Modules frame and press the
Delete button.
•
Select the module in the Modules frame and chose the type of
interfacing.
•
In case of GPIB connection, select the GPIB option. The GPIB address
is adjusted using the scrollbar. The available GPIB addresses are
displayed in the box. The spectrophotometer and accessories are
shipped with the following default GPIB addresses:
GPIB Address
25
20
Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
Instrument/Accessory Name
Spectrophotometer, or
Temperature control accessory
5
75
Advertisement
Table of Contents
Troubleshooting
