Agilent Technologies 8453 Operator's Manual page 468

8
Automation
Cyclic Calibration Sequences with Bracketing
Sequence Table
The sequence table of Brack.M (next page) is truncated to simplify the
example. It consists of seven lines. The first two lines define the recalibration
conditions for each level. The remaining lines define the samples to be
analyzed.
More specifically, the sequence table of Brack.M method has:
• A Bracket entry in the Update Response Factor column that specifies
• A Replace entry in the Update Retention/Migration Times column which
• An entry of 3 in the Recalib Interval column that specifies recalibration
Table 22
194
brakketing of samples with calibration samples.
specifies a replacement of the retention/migration times.
after every three samples.
Sequence Table for BRACK-M
1 1 BRACK-M
2 2 BRACK-M
3 10 BRACK-M
4 11 BRACK-M
5 12 BRACK-M
6 13 BRACK-M
7 14 BRACK-M
2 Calibration 1
2 Calibration 2
1
1
1
1
1
Understanding Your Agilent ChemStation
Bracket Replace
Bracket Replace
3
3