Removing And Replacing Covers - Agilent Technologies 8453 Operator's Manual

1 Turn off the spectrophotometer and disconnect the power cord.
2 To remove the plastic front cover, hold the plastic cover on the lower edge
Figure 21
3 Remove the keyboard cable from the spectrophotometer-sipper interface
Maintenance and Repair

Removing and Replacing Covers

Removing and Replacing Covers
Use the following procedures to access the electronic items in case of a
repair and for troubleshooting reasons.
Removing the Front Covers
with two hands from the left and right of the instrument. Pull the lower edges
of the cover in opposite directions and simultaneously lift up.
Removing the Plastic Front Cover
(SSI) board, located inside the plastic front cover.
109