Installation And Configuration - Agilent Technologies 8453 Operator's Manual

Agilent ChemStation for UV-visible Spectroscopy
Operator's Manual for Biochemical Analysis Software
1

Installation and Configuration

Installing the Biochemical Analysis Software
Configuring your Agilent 89090A Peltier Temperature Controller
Before you can use the biochemical analysis software, you have to install the
software and configure the spectrophotometer. In this chapter the tools and
the procedures for the installation are described. First, the biochemical
analysis software has to be installed on your Agilent ChemStation.
If you want to use the thermal denaturation mode of Agilent ChemStation you
also have to configure the Agilent 89090A peltier temperature controller. This
installation is optional for the kinetics mode.
Agilent Technologies
8
9
7