Setting Up Your Spectrophotometer - Agilent Technologies 8453 Operator's Manual

2 Kinetics Mode

Setting Up your Spectrophotometer

Select the Instrument menu of the biochemical analysis software to setup your
Agilent 8453 spectrophotometer for a time-based measurement.
Choose Setup Spectrophotometer... to display the Instrument Parameters
dialog box, which allows you to set the run-time parameters for the
spectrophotometer. In this dialog box you can set the following parameters.
• You can use the fields to specify lower and upper limits of the range
It is recommended to use the maximum wavelength range of your spectrophotometer. This
N O T E
enables you to use the full benefits of the diode array spectrophotometer, for example, post
run data evaluation at different wavelengths.
14
required by your analysis. The From field defines the lower limit of the
range, the To field defines the upper limit of the range. The default values
are the wavelength range limits of the configured spectrophotometer.
Biochemical Analysis Software for Agilent ChemStation