Configuring Your Agilent 89090A Peltier Temperature Controller - Agilent Technologies 8453 Operator's Manual

Configuring your Agilent 89090A Peltier Temperature Controller

If you are planing to use the thermal denaturation mode of your biochemical
analysis software, you have to configure the Agilent 89090A Peltier
temperature controller.
1 Start the UV-Vis Configuration Editor from the UV-Visible ChemStations
2 If no Agilent 8453 Instrument has been configured yet, add New Instrument
3 Select Instruments... from the Configure Menu.
4 Enter Instrument Name, choose the Initial Screen Window Size and click
5 From the UV-Vis Modules list select TemCo.
6 Set an GPIB address of 20.
7 Press Add to add the Peltier Temperature controller to your current
8 Press OK to close the Device Configuration dialog box.
9 Use the Exit command from the File menu to quit the Configuration Editor.
10 Press Yes to save your configuration before exiting.
Biochemical Analysis Software for Agilent ChemStation
Menu.
as described in the Agilent 8453 UV-visible Spectroscopy System
Operator's Manual.
OK.
configuration.
Installation and Configuration 1
9