Agilent Technologies 8453 Operator's Manual page 87

Setup
1 Make sure that you are in the Standard mode. The mode is indicated on the
2 Select the 'Quantification' task in the analysis panel's selection box.
3 A new task panel is displayed and the Quantification Parameters dialog is
If you are already in the Quantification task, use the Setup on the analysis panel to open the
NO TE
parameter dialog.
Agilent 8453 UV-visible Spectroscopy System Operator's Manual
tool bar of your Agilent ChemStation session.
opened automatically.
Using your Agilent 8453 UV-visible Spectroscopy System
Quantitative Analysis using a Calibration with Standards
4
87