Report Styles - Agilent Technologies 8453 Operator's Manual
Uv-visible spectroscopy system
Hide thumbs
Also See for 8453:
- Operator's manual (198 pages) ,
- User manual, installing and operating manual (128 pages) ,
- Operator's manual (182 pages)
Table of Contents
Advertisement
10
Using the ChemStation Reports
Report Styles
Report Styles
The following report styles are available:
You choose to add a signal to any of the report styles by checking the
appropriate box in the Specify Report dialog box.
• None - No text will be reported. The chromatogram will be reported only if
• Short - Comprises quantitative text results of all integrated signals which
• Detail - Comprises header, quantitative results, and calibration curves. The
• Header + Short - Comprises file header and quantitative text results. The
• GLP + Short - Comprises header, sample information, instrument conditions,
• GLP + Detail - Comprises header, sample information, instrument conditions,
• Full - Comprises header, sample information, instrument conditions,
• Performance - Produces a report according to the limits specified in the Edit
220
the Add Chromatogram Output option is selected.
are setup in the Signal Details dialog box (LC only) or the Signal dialog box
(GC only). The peak width in the short report is calculated with the more
complex formula used by the integrator: PW = 0.3(IPRight - IPLeft) +
0.7(Area/Height) where IPRight and IPLeft are the inflection points.
header is stored in a file called RPTHEAD.TXT in the method directory. You
can change the header using a text editor to include a method specific text.
header is stored in a file called RPTHEAD.TXT in the method directory. You
can change the header using a text editor to include a method specific text.
logbook, signal, and quantitative results. The header is stored in a file called
RPTHEAD.TXT in the method directory. You can change the header using a
text editor to include a method specific text.
logbook, signal, quantitative results, and calibration curves. The header is
stored in a file called RPTHEAD.TXT in the method directory. You can
change the header using a text editor to include a method specific text.
logbook, signals, and quantitative results. The header is stored in a file
called RPTHEAD.TXT in the method directory. You can change the header
using a text editor to include a method specific text.
Performance Limits dialog box of the System Suitability menu.
Understanding Your Agilent ChemStation
Advertisement
Chapters
Table of Contents
Troubleshooting
