Cable Support For Monitor Cables; Walls; General Requirement; Seismic Areas - GE Innova 2100-IQ Preinstallation Manual

Innova 2100-IQ, 3100/3100-IQ, 4100/4100-IQ Cardiovascular Imaging System Pre-Installation Manual
GE Healthcare

3.4.5 Cable Support for Monitor Cables

A cable support (cable drape) is provided with an Innova LC System.
The cable support kit contains:
• 1 B2054 EK (Drape with 3 M Bridge, on suspensions for X-Ray tubes and monitors, contains
8 FT 6 inch track, three carriers, and mounting hardware)
• 1 B2055 ED (stationary rail parts)
NOTE: In Americas the Cable Support Kit must be provided locally by the Customer (e.g.
CPGE55 from Unistrut).

3.5 Walls

3.5.1 General requirement

The C1 Cabinet, the C2 Cabinet, and the PDB Cabinet must be securely fastened to the wall to
prevent them from tipping.

3.5.2 Seismic Areas

NOTE: For Fluoro UPS option (US version only), the Fluoro UPS supplier will deliver anchoring
brackets (see
Consider local seismic codes when planning cabinet mounting. Consult seismic expert to
determine which mounting method is appropriate for the seismic region. Certain seismic regions
require additional reinforcement in walls. See
Compatibility
Illustration 3-12:
Chapter 3 Physical Requirements of Room
Illustration
for referential documents.
3-12). The bolts will be provided by the customer.
Chapter 2, Section 3, Basic Innova System
Direction 5160944-13-1EN, Revision 2
77