Report Page Layout - GE LOGIQ 500 Advanced Reference Manual

Report Page Layout

LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
The Multigestational Option adds additional pages to the OB
Report displays.
Pages one and two of the Multigestational Option appear the
same as the Basic OB Reporting package; except, pages one
and two will be generated for each fetus. They will have the
fetus identifying information between the heading and
measurements. The fetal information displayed is:
"Fetus : $/% POS: ############ PLAC: ############"
$ = Fetal ID (A, B, C or D)
% = Total number of fetuses
The second to last page, depending on the number of fetuses,
is a summary of the measurements and calculations found on
page one. However, all fetuses (maximum of 4) are dipslayed
on this page. Since page one is different by region, page three
is also different by region selected (i.e. USA, European, Tokyo
University or Osaka University).
The last page, depending on the number of fetuses, is a
summary that compares all fetuses. The heading is different by
region. It contains the following:
Fetus Pos: Fetus position. This 12 character string is
common between pages 1, 2 and 4.
Fluid: An estimate of the amount of aminotic fluid.
Common between pages 2 and 4.
Biophys: Total biophysical profile score from page 2.
HR (BPM): Heart rate in beats per minute from page 2.
AFI (USA Only): Amniotic Fluid Index summary from page 2.
Placenta: Shows location fetus, grade and previa
(yes, no or partial)
Membrane: Shows location between fetus to fetus.
OB–Multigestational
4–25