Foundation™ Fieldbus; Introduction; Startup - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual
7 Foundation™ Fieldbus
7.1

Introduction

FOUNDATION™ Fieldbus (FF) is a device application for
configuration of FF enabled field devices. On-line connection
is via the integrated H1 modem. Devices directly connected
to an H1 field segment can be configured and supported by
FF
7.2

Startup

FOUNDATION™ Fieldbus is started by selecting:
DASHBOARD >>
Task can be selected for CH1, CH2, P1 and P2. Refer to
Section 2.1.
FOUNDATION™ Field us can also be selected from the
CALIBRATOR function.
Select:
Note: When Fieldbus is operational, only Volts measure is
a valid mode for channel 2
06 June 2013
COMMUNICATOR channel from TASK SETTINGS
FUNCTION >> FIELDBUS
FIELDBUS
Druck DPI620 Genii
Page 102 of 179