Set System Name - Avaya P330-ML-ML Reference Manual

Chapter 3 Avaya P330-ML Layer 3 CLI Commands

set system name

User level: privileged, supervisor.
Use the set system name command to set the mib2 system name MIB variable.
The syntax for this command is:
set system name [string]
string
Example:
Router-N(super)# set system name P330-ML-1
Done!
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
246
• The system name string should be typed inside inverted
commas.
• The name is cleared if you leave this field blank.
Avaya P330-ML Reference Guide