Chapter 2
Avaya P330-ML Layer 2 CLI Commands
no snmp-server community
User level: supervisor
Use the no snmp-server community command to deny access to the device
using community strings.
The syntax for this command is:
no snmp-server community
Example:
P330-N# no snmp-server community
Done!
no snmp-server group
User level: supervisor
Use the no snmp-server group command to remove a specified SNMP group.
When a security module is not provided, all instances of the group are removed. If a
security model and level are specified, then only corresponding group instance is
removed
The syntax for this command is:
no snmp-server group <groupname> {v1 | v2c | v3 {noauth | auth
| priv}}
groupname
v1, v2c, v3
noauth,
auth, priv
Example:
P330-1(super)# no snmp-server group newgroupG v3 noauth
Done!
48
The name of the SNMP group.
The security model to remove from the group.
Keywords that specifies the type of authentication model
instance to remove from the group.
• noauth
• auth
• priv
Avaya P330-ML Reference Guide