Example:
Router-N# fragment size 150
fragment timeout
Use the fragment timeout command to set the maximum number of seconds to
reassemble a fragmented IP packet destined to the router. Use the no form of this
command to set the fragment timeout to the default value (10).
The router does not perform reassembly of packets in transit.
The syntax for this command is:
[no] fragment timeout <timeout>
timeout
Example:
Router-N# fragment timeout 30
help
User level: user, privileged, supervisor
Use the help command to obtain help on CLI commands.
The syntax for this command is:
help <command>
command
Avaya P330-ML Reference Guide
Chapter 3
The maximum number of seconds to re-assemble an IP packet,
from 5 to 120. The default is 10.
A specific CLI command or group of commands
Avaya P330-ML Layer 3 CLI Commands
225