Table of Contents
Advertisement
set queuing scheme
User level: privileged, supervisor.
This command is applicable to P330-ML-ML switches only.
Use the set queuing scheme command to set the queuing scheme to either strict
or weighted round robin and to set the weights.
The syntax for this command is:
set queuing scheme {wrr {H} | strict | default} [module]
wrr/strict
/default
H
module
Examples:
P330-N# set queuing scheme wrr 10 2
Module Queuing Scheme
------ --------------
2
P330-N# set queuing scheme default
Module Queuing Scheme
------ --------------
1
Default
2
Default
set radius authentication enable/disable
User level: privileged, supervisor.
Enables or disables RADIUS authentication for the P330-ML switch.
Avaya P330-ML Reference Guide
Sets queuing scheme to weighted round robin, strict, or the default.
Ratio between high and low priority queues. This parameter is only
used when the queuing scheme is weighted round robin.
The module number to which the queuing scheme applies. If no
module is specified, the command affects all P330-ML-ML modules
in the stack.
Wrr 10:1
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
109
Advertisement
Table of Contents
