Hostname; Icmp In-Echo-Limit - Avaya P330-ML-ML Reference Manual

Chapter 3 Avaya P330-ML Layer 3 CLI Commands
Example:
Router-N> help arp
Arp commands:
-------------------------------------------------------------------------
Syntax : [no] arp <ip addr> <mac addr>
Examples:
arp timeout

hostname

User level: privileged, supervisor.
Use the hostname command to change the system prompt used for the router
Use the no hostname command to return the system prompt to its default.
This command does not change the system prompt of the switch. To change the
system prompt of the switch, use the host name command in the Layer 2 tree.
The syntax for this command is:
[no] hostname [<hostname_string>]
hostname_string
Example:
Router-N> hostname Marketing
Marketing-1 #
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".

icmp in-echo-limit

User level: privileged, supervisor.
Use the icmp in-echo-limit command to set the number of echo requests per
second that the router will reply.
Use the no icmp in-echo-limit command to restores the value to its default.
226
<ip addr> - IP address
<mac addr> - MAC address
arp 137.22.33.44 00:11:22:33:44:55
no arp 137.22.33.55
The string to be used as the hostname (up to 20 characters).
If you do not enter a string, the current hostname is
displayed.
Set the ARP timeout
Avaya P330-ML Reference Guide