Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N# set logging server condition LAG Warning
135.64.102.224
Done!
set logging server disable
User level: privileged, supervisor.
Use the set logging server disable command to disable logging messages
to a Syslog server.
You need to define a logging server using the set logging server
command before you can disable the server.
The syntax for this command is:
set logging server disable <ip-address>
ip-address
Example:
P330-N# set logging server disable 149.49.35.21
Done!
set logging server enable
User level: privileged, supervisor.
Use the set logging server enable command to enable logging
messages to a Syslog server.
You need to define a logging server using the set logging server
command before you can enable the server.
The syntax for this command is:
set logging server enable <ip-address>
ip-address
78
The IP address of the Syslog server.
The IP address of the Syslog server.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
