Table of Contents
Advertisement
The syntax for this command is:
show upload status [<mod_num>]
mod_num
(Optional)
Example:
Router-N> show upload status 1
Module
Source file
Destination file : c:\conf.cfg
Host
Running state
Failure display
Last warning
show username
User level: supervisor
Use the show username command to display the local user accounts.
The syntax for this command is:
show username
Example:
P330-1(super)# show username
-------------------------------
root
gkohll
readwrite
show utilization
User level: privileged, supervisor.
Use the show utilization command to display CPU utilization statistics for
modules in the stack.
Avaya P330-ML Reference Guide
Number of the module. If you do not specify a number, upload
statuses for all modules in the stack are shown.
: 1
: stack-config
: 149.49.36.200
: Executing
: (null)
: No-warning
User account
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
password
--------------------------------
*****
*****
*****
access-type
--------
admin
read-only
read-write
197
Advertisement
Table of Contents
