Set Port Powerline; Set Port Powerline Priority - Avaya P330-ML-ML Reference Manual

set port powerline

User level: privileged, supervisor.
This command applies to P333T-PWR switches only and is used by P330-
ML-ML switches to control P333T-PWR modules in the stack.
Use the set port powerinline command to enable or disable the load detection
process and power delivery for the port.
The syntax for this command is:
set port powerinline <module_number/port_number> {[enable] |
disable}
module_
number
port_
number
Example:
P330-N# set port powerinline 3/1-3 enable
Load detection process on ports 3/1-3 is enabled

set port powerline priority

User level: privileged, supervisor.
This command applies to P333T-PWR switches only and is used by P330-
ML-ML switches to control P333T-PWR modules in the stack.
Use the set port power inline priority command to configure the priority
level of powering the port. Possible values are Critical, High, and Low. At power on
all ports are set to Low Priority.
Within each group, the lowest port number has a highest priority, i.e. within the
ports 1 to 8, port 1 has the highest priority although its priority is lower than port 9
which belongs to High priority group.
The syntax for this command is:
set port powerinline priority <module_number/port_number>
<priority>
module_number
port_number
Avaya P330-ML Reference Guide
Chapter 2
Number of the module hosting the port for which load detection is to
be enabled/disabled.
Number of the port for which load detection should be
enabled/disabled.
enable - enables load detection process for port
disable - disables load detection process for port
Number of the module hosting the port for which a
powerline priority level is to be set.
Number of the port for which a powerline priority level is
to be set.
Avaya P330-ML Layer 2 CLI Commands
97