Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-1(super)# set dot1x tx-period 90
Done!
set inband vlan
User level: privileged, supervisor.
Use the set inband vlan command to set the inband management VLAN.
The syntax for this command is:
set inband vlan <value>
value
Example:
P330-N# set inband vlan 1
Management VLAN number set to 1
set intelligent-multicast
User level: privileged, supervisor.
Use the set intelligent-multicast command to enable or disable the IP-
multicast filtering application.
The syntax for this command is:
set intelligent-multicast {enable|disable}
Example:
P330-N# set intelligent-multicast enable
Done!
set intelligent-multicast client-port-pruning time
User level: privileged, supervisor.
Use the set intelligent-multicast client port pruning time
command to set the aging time for client ports. This is the time after the P330-ML
switch reset during which the filtering information is learned by the switch but not
configured on the ports.
66
Number of the VLAN to be assigned to the management
interface.
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
