Show Ppp Session; Show Protocol - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N>show ppp incoming timeout
PPP incoming timeout is 15 minutes

show ppp session

User level: user, privileged, supervisor
Use the show ppp session command to display PPP parameters and statistics of
an active PPP session.
The syntax for this command is:
show ppp session
Example:
P330-N>show ppp session

show protocol

User level: user, privileged, supervisor
Use the show protocol command to display the current state of allowed
protocols on the switch.
The syntax for this command is:
show protocol
Example:
P330-N>show protocol
Protocols
-------------
SSH
TELNET-CLIENT
SNMPv1
SNMPv3
TELNET
HTTP
ICMP redirect
recovery-password
174
Status
--------
ON
OFF
OFF
ON
ON
OFF
OFF
ON
Avaya P330-ML Reference Guide