Table of Contents
Advertisement
The syntax for this command is:
set port dot1x max-req <module/port> <count>
module/
port
count
Example:
P330-N>set port dot1x max-req 1/2 5
set port dot1x port-control
User level: supervisor
Use the set port dot1x port-control command to set the dot1x parameter
per port.
The syntax for this command is:
set port dot1x port-control <module/port> <mode>
module/
port
mode
Example:
P330-1(super)# set port dot1x port-control 2/3 force-
authorize
port 1/2 control was set to force-authorize
set port dot1x quiet-period
User level: supervisor
Use the set port dot1x quiet-period command to set the 802.1x quiet period
per port.
Avaya P330-ML Reference Guide
Chapter 2
Module and port number (or range of ports)
Number of attempts — 1-10
Module and port number (or range of ports)
force-unauthorize - the port is always is blocking state
auto - forwarding/blocking depends on authorization outcome
force-authorize - the port is always in forwarding state
Avaya P330-ML Layer 2 CLI Commands
87
Advertisement
Table of Contents
