Table of Contents
Advertisement
set radius authentication secret
User level: supervisor
Use the set radius authentication secret command to enable secret
authentication for the P330-ML unit.
The syntax for this command is:
set radius authentication secret <string>
string
Example:
P330-1(super)# set radius authentication secret hush
set radius authentication server
User level: privileged, supervisor.
Sets the IP address (and shared secret) of the primary or secondary RADIUS
Authentication server.
The syntax for this command is:
set radius authentication server <ip-addr> {primary |
secondary}
ip-addr
primary
secondary
Example:
P330-1(super)# set radius authentication server
192.40.12.36 primary
set radius authentication udp-port
User level: privileged, supervisor.
Use the set radius authentication udp-port command to set the RFC
2138 approved UDP port number.
Normally, the UDP port number should be set to its default value of 1812. Some
early implementations of the RADIUS server used port number 1645.
Avaya P330-ML Reference Guide
text password
IP address of the RADIUS authentication server
default - Primary authentication server
Secondary authentication server
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
111
Advertisement
Table of Contents
