Table of Contents
Advertisement
The syntax for this command is:
icmp in-echo-limit <size>
size
Example:
Router-N# icmp in-echo-limit 100
Done!
interface
User level: privileged, supervisor.
Use the interface command to create and enter the Interface Configuration
Mode.
Use the no interface command to delete a specific IP interface.
The syntax for this command is:
[no] interface <interface name>
interface name
Example:
Router-N(configure)# interface marketing
Done!
Router-1(config-if:marketing)#
If you wish to enter a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
ip access-default-action
User level: privileged, supervisor.
Use the ip access-default-action command to set the default action for a
specific policy list.
The syntax for this command is:
ip access-default-action <policy-list-number> <default-
Avaya P330-ML Reference Guide
Chapter 3
The rate of echo requests per second. Value range = 1 to
1000. Default = 50.
String (up to 32 characters). This name should not
start with the letters "def".
Avaya P330-ML Layer 3 CLI Commands
227
Advertisement
Table of Contents
