Chapter 3
Avaya P330-ML Layer 3 CLI Commands
ip netbios-rebroadcast
User level: privileged, supervisor.
Use the ip netbios-rebroadcast command to set the NETBIOS rebroadcasts
mode on an interface.
Use the no ip netbios-rebroadcast command to disable NETBIOS
rebroadcasts on an interface.
The syntax for this command is:
[no] ip netbios-rebroadcast [<direction>]
The possible values for direction are:
both
disable
Example:
To enable rebroadcasting of netbios packets received by and sent from the interface
"marketing":
Router-N(config-if:marketing)# ip netbios-rebroadcast both
ip ospf authentication-key
User level: privileged, supervisor.
Use the ip ospf authentication-key command to configure the interface
authentication password.
Use the no ip ospf authentication-key command to remove the OSPF
password.
The syntax for this command is:
[no] ip ospf authentication-key <key>
key
Example:
Router-N(configure-if:marketing) # ip ospf authentication-
key my_pass
278
Netbios packets received on the interface rebroadcasted to
other interfaces and netbios packets received on other
interfaces are rebroadcasted into this interface. This is the
default value.
Netbios packets are not rebroadcasted into or out of this
interface.
string (up to 8 characters)
Avaya P330-ML Reference Guide