Table of Contents
Advertisement
show device-mode
User level: user, privileged, supervisor
Use the show device-mode command to show the current P330-ML-ML or
P333R operating mode. Possible modes are Router, or Layer 2.
This command is not available to the P333T, P334T, P332MF and P333T-PWR
switches which do not have Router and to P333R-LB which is always in
Load-Balancing mode.
The syntax for this command is:
show device-mode
Example:
P330-N>show device mode
Device mode is router
show dot1x
User level: user, privileged, supervisor
Use the show dot1x command to display the system dot1x capabilities, protocol
version, and timer values.
The syntax for this command is:
show dot1x
Example:
P330-N>show dot1x mode
PAE Capabilities
Protocol Version
system-auth-control
*** Warning : Authentication server
disabled/not-exist and so,
*** no authentication can be made
show download status
User level: user, privileged, supervisor
This command applies the P330-ML-ML switches only.
Use the show download status command to display a summary of the last
software download operation.
Avaya P330-ML Reference Guide
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Authenticator Only
1
disabled
( RADIUS ) is
135
Advertisement
Table of Contents
