Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
The syntax for this command is:
set radius authentication {enable|disable}
enable
disable
Example:
P330-1(super)# set radius authentication enable
set radius authentication retry-number
User level: privileged, supervisor.
Sets the number of times an access request is sent when there is no response.
The syntax for this command is:
set radius authentication retry-number <number>
number
Example:
P330-1(super)# set radius authentication retry-number 3
set radius authentication retry-time
User level: privileged, supervisor.
Sets the time to wait before re-sending an access request.
The syntax for this command is:
set radius authentication retry-time <time>
time
Example:
P330-1(super)# set radius authentication retry-time 5
110
Enable RADIUS authentication
Disable RADIUS authentication (default)
Number of retries
Retry time in seconds
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
