Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example: (by Module/Port)
P330-N>show cam 1/1
show cam 1/1
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-59-03-78
00-d0-79-0a-0a-da
00-40-0d-43-1e-e9
...
00-40-0d-c6-24-01
Total Matching CAM Entries Displayed = 178
show cam mac
User level: user, privileged, supervisor
Use the show cam mac command to display the module and port number where
a specific MAC address was learned.
MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
The syntax for this command is:
show cam mac <mac-addr>
mac-addr
Example:
P330-N# show cam mac 00-00-81-01-23-45
Dest MAC/Route Dest Destination Ports VLAN
------------------- ----------------- ----
00-a0-cc-66-4e-52
Total Matching CAM Entries Displayed = 1
show cam vlan
User level: user, privileged, supervisor
Use the show cam vlan command to display the MAC addresses learned on a
specific VLAN. The MAC addresses are displayed with their destination module
and port number.
MACs associated with LAGs appear under the LAG ID, not under the LAG
port.
132
1/1
1/1
1/1
1/1
MAC address to search for.
1/8
1
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
