source
destination
protocol
source port
destination port
established
Example:
Router-N(configure)# ip simulate 100 192.67.85.12
193.76.54.25
ip ssh enable
User level: supervisor
Use the ip ssh command to enable the SSH server.
The syntax for this command is:
ip ssh enable
Example:
P330-N# ip ssh enable
Done!
ip telnet enable
User level: supervisor
Use the ip telnet enable command to enable Telnet access to the device.
The syntax for this command is:
ip telnet enable
Example:
P330-N# ip telnet enable
Done!
Avaya P330-ML Reference Guide
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
source ip address
destination ip address
ip | tcp | udp | integer (1...255)
integer (1...65535)
integer (1...65535)
value of TCP established bit
43