Set Intermodule Port Redundancy - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Example:
P330-N# set interface ppp enable
Entering the Modem mode within 60 seconds...
Please check that the proprietary modem cable is plugged
into the console port
Example:
P330-N# set interface ppp disable
Entering the Terminal mode immediately

set intermodule port redundancy

User level: privileged, supervisor.
Use the set intermodule port redundancy command to define the stack's
unique intermodule redundancy scheme. The defined scheme can be cleared using
the set intermodule port redundancy off command.
You must disable Spanning Tree before you can enable intermodule port
redundancy.
The syntax for this command is:
set intermodule port redundancy <module/prim-port>
<module/second-port> {on [<name>]}
module/prim-port
module/second-port
on
name
Example:
P330-N# set intermodule port redundancy 1/7 2/12 on
backbone
backbone: port 2/12 is intermodule redundant to port 1/7
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, e.g. "new york".
70
Primary port number
Secondary port number
Set the intermodule redundancy
Name of the fast redundancy (default is
'intermodule')
Avaya P330-ML Reference Guide