Table of Contents
Advertisement
Chapter 2
Avaya P330-ML Layer 2 CLI Commands
Example:
P330-1(super)# username john password johnny access-type
read-write
User account added.
P330-1(super)# username root password secret access-type
read-write
ERROR: User account root has always an administrator access
type.
P330-1(super)# username root password secret access-type
admin
User account modified.
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example "new york".
validate-group
User level: privileged, supervisor.
This command applies to the P334T-ML only when it is in device mode
"Layer2".
Use the validate-group command to verify that all the rules in a policy list are
valid.
If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate-group <policy-list-number>[quiet]
policy-list-number
quiet
210
A valid id number for the policy list currently
defined for the switch
does not display error messages
Avaya P330-ML Reference Guide
Advertisement
Table of Contents
