Ping; Prompt-Length - Avaya P330-ML-ML Reference Manual

Example:
Router-N(configure)# ip simulate 100 192.67.85.12
193.76.54.25

ping

User level: user, privileged, supervisor
Use the ping command to send ICMP echo request packets to another node on the
network.
You can use this command via the master switch only.
The command is executed until you
The syntax for this command is:
ping <host> [<interval> [<size> [<timeout> [<source
address>]]]]]
host
interval
size
timeout
source
address
Example: to ping the IP number 149.49.48.1 three times:
Router-N> ping 149.49.48.1 3
PING 149.49.48.1: 56 data bytes
64 bytes from 149.49.48.1: icmp_seq=0. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=1. time=0. ms
64 bytes from 149.49.48.1: icmp_seq=2. time=0. ms
----149.49.48.1 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)

prompt-length

Avaya P330-ML Reference Guide
Chapter 3
Host IP address/Internet address of route destination. If missing
then the last host IP is used.
Interval between ping commands in seconds (1 to 256)
Size of packet in bytes (22 to 66500)
Timeout in seconds (1 to 10)
IP address of one of the router interfaces
min/avg/max = 0/0/0
Avaya P330-ML Layer 3 CLI Commands
239