Show Logging File Content - Avaya P330-ML-ML Reference Manual

Chapter 2 Avaya P330-ML Layer 2 CLI Commands

show logging file content

User level: user, privileged, supervisor
Use the show logging file content command to display the contents of the
log file.
The syntax for this command is:
show logging file content [<severity>] [{all|<application>}]
[<number>] [<module number>]
severity
all
152
The minimum severity of the logging messages that are
displayed. The severity is represented by an integer. Possible
values are:
• 0 – Emergency
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notification
• 6 – Informational
• 7 – Debugging
A keyword signifying that the filter applies to logging
messages from all applications.
Avaya P330-ML Reference Guide